|
product description - wifiCAMit_Dome
wifiCAMit_Dome is a color wireless network camera by 3JTech with built-in Plug & Play, Ethernet software stacks and protocols. Just plug the wifiCAMit_Dome directly into an Ethernet port of network devices with RJ45 cable or use wireless network 802.11b / 802.11g, and you will be able to view the camera sites in real time from anywhere in the world with Internet access. Through our RCS (Remote Camera Service) system, you will also be able to control the camera from any PC/Notebook/Mobile phone/PDA phone over the web browser.
wifiCAMit_Dome supports wireless RFIO to connect with the wireless RF Sensor to be able to trigger the camera as a security alarm. wifiCAMit_Dome can send the triggered event by means of SMS, MMS and/or e-mail via RCS system to authorized users. It can also record triggered images to RCS system at the same time.
Hardware Specification:
. CPU ARM7 32bit RISC CPU
. SDRAM 16 MB
. Flash ROM 2 MB
. OS Linux 2.4 kernel
. Ethernet RJ45, auto-sensing 10/100 Base-T
. DC 5V 420mA
. Dimension: 11.7 x 11.7 x 7 cm
. Weight: 200gm
Image Sensor Specification:
. 1/5 " CMOS sensor (OV 7660)
. Sensitivity: 1.0 V/LUX-Sec
. Video Format: JPEG/MJPEG
. Frame Rate: 30fps@QVGA , 15fps@VGA
. Video Resolution: 176x144, 320x240, 640x480
. Light Frequency: 50Hz, 60Hz
. Adjustable Brightness / Contrast / Saturation
Wireless Operation Mode:
. Ad Hoc / Infrastructure
Encryption Type:
. WEP (5 ASCII / WEP 13 ASCII), WEP (10 HES / 26 HEX)
. WPA / TKIP, WPA / AES
Optional Security Accessories:
RF Sensor
. Built-in 3.6V/2100mAH battery
. Trigger input contact for alarm sensor from wire to wireless
. LED status indication
. ON/OFF switch
. Working frequency: 433 MHz
(Programmable 315 MHz, 868 MHz and 915 MHz)
. Power consumption:
TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
. High sensitivity (-110 dBm at 1.2 kbps)
RF Flip
. Built-in 3V/200mAH battery
. Enable RFIO function button
. Disable RFIO function button
. LED status indication
. Working frequency: 433 MHz
(programmable 315Mhz, 868Mhz and 915 MHz)
. Power consumption:
TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
. High sensitivity (-110 dBm at 1.2 kbps)
RFIO
. Working frequency: 433 MHz.
( programmable 315Mhz, 868Mhz and 915 MHz)
. Power consumption:
TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
. High sensitivity (-110 dBm at 1.2 kbps)
*Specifications are subject to change without notice .
|
